Curious to see how many people here are using Wyoming Satellites, and if so, what are you doing to build/house them?
I have a sample one working on an old pi and a computer speaker hooked up, with my primary Blue mic. Obviously this isn’t long term, and I’m looking at building a few of these.
So, what do you use? Raspberry pi? Some sort of hat on it? What sort of casing do you use? Any really cool implementations? I’ll take all ideas and suggestions!
I am making an esphome system for my old Yamaha AV receiver. RCA out via a cheap i2s chip, mems I2S mic in the enclosure that can hear well enough in the room, and an IR blaster output to change the AV receiver channel to the esp when voice is activated and change it back after.
Cool side effect is that it can also be used as an HA media player for streaming Spotify and local music to the speaker system.
I’ve accomplished this with the Atom Echo and they work… fine?
The speaker is essentially inaudible, but the mic works well enough for me to just yell at HomeAssistant to do things.
And hey, can’t beat the size/price/power footprint and the deployment with ESPHome takes like, 30 seconds.
These are neat! Good note about the speaker, I’ll try one out
If all you need is for it to go ‘I turned on the light’, they’re fine. I wouldn’t expect to use them for anything more detailed or music-oriented.
I’m still dabbling with this, but so far I have a Pi Zero2W with a reSpeaker 2-Mics Pi HAT and an old speaker (no idea where from) that (luckily?) has the correct connector on.
It’s ok as a geeky POC, but it needs work to gain sufficient WAF
I only have one at the moment. I bought a cheap Dell Wyse thin client from eBay, installed a light Linux distro on it and set it up as a Wyoming Satellite and as a snapcast client. That is connected to an old all in one mini HiFi for speakers. For the mic I just have a small omnidirectional USB mic plugged into the front. Biggest hassle setting it up was ALSA since snapcast and Wyoming were fighting over the devices
